Pantech C150 - Manual (Page 87)

Settings
86
PIN1 Check
Press the [Left] or [Right] scroll key and [o] key for setup.
If you input the incorrect PIN1 code three consecutive times,
you will be prompted to input the PUK1 number. The default
is Disabled.
•
Enabled: Input PIN1 whenever the power is turned on.
• Disabled: Do not input PIN1 whenever the power is
turned on.
Change PIN1
Change the PIN1 number.
You can change the PIN1 number only when the phone is
set for PIN1 Enable.
Phone Lock
This function allows you to lock your phone until the correct
password is input.
Press the [o] key after you type the password.
Change Password
This function allows you to change your phone’s password.
The default password is 1234.
Phone Barring
This function offers multiple methods to limit incoming or
outgoing calls. In general, the barring service becomes
activated by interoperating with the network, but phone
barring is made by the phone itself. Major functions are as
follows.
•
Incoming: Limits all incoming calls.
• On: Set up all incoming calls barring.
• Off: Cancel all incoming calls barring.
• Outgoing: Limit all outgoing calls. When you attempt
to make a call that has the prefixed number that you
previously registered, the call is barred.
• Bar All: Set up all outgoing calls barring.
• Bar Prefixed: Add and delete the prefixed number. (Prefix also
means your 10 or 11 digit number of your choosing)
• Off: Cancel all outgoing calls barring including the bar prefixed.
Fixed Dialing (Fixed Dialing Numbers)
Fixed Dialing is a service that limits your access to specific
numbers in the Address Book list recorded on the SIM. Input
the PIN2 to set up or cancel this service. (PIN 2 must be
correctly entered within 3 tries.)
•
On: Set up Fixed Dialing service.
070628_C150_EN(00)ºˆ¡§.indd 86 2007.6.28 4:54:38 PM