Philips DCM105 - Manual (Page 16)

17
12 Troubleshooting
Warning
Never remove the casing of this apparatus. ‡
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
Ensure that the AC power plug of the ‡
unit is connected properly.
Ensure that there is power at the AC
‡
outlet.
As a power-saving feature, the unit
‡
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
No sound or poor sound
Adjust the volume. ‡
Disconnect the headphones. ‡
Check that the speakers are connected ‡
correctly.
Check if the stripped speaker wires are
‡
clamped.
Left and right sound outputs reversed
Check the speaker connections and ‡
location.
No response from the apparatus
Disconnect and reconnect the AC power ‡
plug, then turn on the system again.
As a power-saving feature, the system
‡
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
Tuner
Tuning Range FM: 87.5 - 108 MHz
Tuning Grid 50 KHz
Sensitivity
- Mono, 26 dB S/N
Ratio
< 22 dBf
Search Selectivity < 36 dBu
Total Harmonic
Distortion
< 3%
Signal to Noise Ratio > 45 dBu
Speakers
Speaker Impedance 4ohm
Speaker Driver 3.5”
Sensitivity >82dB/m/W
General information
AC power 110 - 127/220-240 V,
50/60 Hz
Operation Power
Consumption
20 W
Standby Power
Consumption
< 4 W
Dimensions
- Main Unit
(W x H x D)
- Speaker Box
(W x H x D)
150 x 152 x 250 mm
150 x 152 x 197 mm
Weight
- With Packing
- Main Unit
- Speaker Box
5.07 kg
2.02 kg
2 x 0.895 kg
English
EN