Philips DCM105 - Manual (Page 15)

16
11 Product
information
Note
Product information is subject to change ‡
without prior notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Rated Output Power 2X5W RMS
Frequency Response
60 - 16kHz, ±3dB
Signal to Noise Ratio >65dB
Aux Input 0.5 V RMS 20kohm
Disc
Laser Type Semiconductor
Disc Diameter 12cm/8cm
Support Disc CD-DA, CD-R,
CD-RW
Audio DAC 24Bits / 44.1kHz
Total Harmonic
Distortion <1%
Frequency Response 60Hz -16kHz
(44.1kHz)
S/N Ratio >65dBA
Note
If the iPod source is selected but no iPod is ‡
connected, the system will switch to the tuner
source automatically.
Activate and deactivate alarm timer
1
In the standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
If timer is activated, the display shows
»
.
If timer is deactivated,
»
disappears on
the display.
Note
Alarm timer is not available in MP3 LINK ‡
mode.
If the DISC source is selected and the
‡
track cannot be played, tuner is activated
automatically.
Listen to an audio player
You can listen to an MP3 player through this
unit.
1
Press MP3 LINK to select MP3 LINK
source.
2
Connect the supplied MP3 link cable to:
‡
MP3 LINK jack (3.5 mm) on the unit
the headphone jack on an external
‡
device
3
Start to play the device (see the device
user manual).
EN