Philips DCM105 - Manual (Page 10)

11
5 Play a disc
1
Press DISC to select the disc source.
2
Press on the top panel of the unit.
The disc door opens.
»
3
Place a disc onto the tray and press
again.
Ensure that the label side faces
»
upwards.
4
Play starts automatically.
If play does not start, press
‡ / to
select a track and then press OK/ .
Turn on
1
Press POWER.
The unit switches to the last selected
»
source.
Switch to standby
1
Press POWER to switch the unit to
standby mode.
The backlight on the display panel is
»
dimmed.
The clock (if set) appears on the
»
display panel.
Set clock
1
In the standby mode, press and hold
CLOCK/DISPLAY to activate the clock
setting mode.
The 12 hour or 24 hour format is
»
displayed.
2
Press PROG repeatedly to select 12 hour
or 24 hour format.
3
Press CLOCK/DISPLAY WRFRQÀUP
The hour digits are displayed and begin
»
to blink.
4
Press / to set the hour.
5
Press CLOCK/DISPLAY WRFRQÀUP
The minute digits are displayed and
»
begin to blink.
6
Press / to set the minute.
7
Press CLOCK/DISPLAY WRFRQÀUP
Tip
To view the clock during play, press ‡ CLOCK/
DISPLAY repeatedly until the clock is
displayed.
English
EN