Polaris IQ Turbo Dragon - Manual (Page 58)

55
THE PERFECT FIT
IQ/LX Rear Suspension Adjustments
Torsion Spring Preload
To adjust rear torsion spring preload, rotate the three-position cam using
the engine spark plug tool. Adjustment is easiest when the cam is
rotated from low to medium, and then to high. Rotating directly from
low to high will require significantly more effort.
Different rate torsion springs are available if a firmer ride is desired. See
your dealer for more information.
Limiter Strap Position (Ski Pressure)
Ski pressure is set at the factory to
deliver the optimum balance between
ride and handling. If a rider prefers
more ski pressure for improved steer-
ing performance, adjustments can be
made to the front limiter straps.
Tighten the straps to increase ski
pressure. Loosen the straps to reduce
ski pressure.
1. Remove the nuts and flat washers
from the upper limiter straps.
2. Relocate the straps to the desired position.
3. Reinstall the nuts and washers. Tighten securely.
Soft Medium Firm
Upper
Nuts