Setting the clock 67 using the aux source 67, Setting the clock, Using the aux source – Pioneer AVX-P8DVD User Manual

Page 67: Other functions, Selecting aux as the source, Setting the aux title

Touch d to select AUTO, and the display auto-

matically opens/closes when power to this

unit is turned on.

Setting the clock

Use these instructions to set the clock.

1 Touch A.MENU and SETUP and then

touch CLOCK ADJ.

2 Touch OFF to turn the clock display on.

ON will appear in the display instead of OFF.

Clock display is now on.

# To turn the clock display off, touch ON.

3 Touch c or d to select the segment of

the clock display you wish to set.

Each time you touch c or d it will select one

segment of the clock display:

HourMinute

As you select segments of the clock display

the segment selected will be highlighted.

4 Touch a or b to set the clock.

Each time you touch a it increases the se-

lected hour or minute. Each time you touch b

it decreases the selected hour or minute.

Notes

! You can match the clock to a time signal by

touching JUST.
If the minute is 0029, the minutes are

rounded down. (e.g., 10:18 becomes
10:00.)

If the minute is 3059, the minutes are

rounded up. (e.g., 10:36 becomes 11:00.)

! Even when the sources are off, the clock dis-

play appears on the display.

Using the AUX source

An IP-BUS-RCA Interconnector such as the

CD-RB20/CD-RB10 (sold separately) lets you

connect this unit to auxiliary equipment fea-

turing RCA output. For more details, refer to

the IP-BUS-RCA Interconnector owners man-

ual.

! Only when using this unit with ADD-ON

mode (M), you can use the AUX source.

Selecting AUX as the source

% Touch the source icon and then touch

AUX to select AUX as the source.

# When the source icon is not displayed, you
can display it by touching the screen.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 63.

Setting the AUX title

The title displayed for the AUX source can be

changed.

1 After you have selected AUX as the

source, touch A.MENU and FUNCTION and

then touch NAME EDIT.

2 Touch ABC to select the desired charac-

ter type.

Touch ABC repeatedly to switch between the

following character types:

Alphabet (upper case), numbers and symbols

Alphabet (lower case)European letters,

such as those with accents (e.g., б, а, д, з)

Other Functions

Section

Other

Functions