Pioneer AVX-P8DVD - Manual (Page 66)

This unit features a function that automatically
switches to the rear view camera video
(VIDEO 2/BACK CAMERA INPUT jack) when
a rear view camera is installed on your vehicle.
When the gear shift is in REVERSE (R) posi-
tion, the video automatically switches to a rear
view camera video. (For more details, consult
your dealer.)
! Confirm the setting immediately whether
the display changes to a rear view camera
video when the gear shift is moved to RE-
VERSE (R) from another position.
! When the display changes to a rear view
camera video during normal drivings,
switch to another setting.
! To return to the source display, press
V.ADJ.
1 Touch A.MENU and SETUP and then
touch AV INPUT2.
2 Touch c or d to select B. CAMERA.
3 Touch b to select POLARITY.
4 Touch c or d to select an appropriate
setting for polarity.
Each time you touch c or d it switches be-
tween the following polarity:
! BATTERY When the polarity of the con-
nected lead is positive while the gear shift
is in REVERSE (R) position
! GND When the polarity of the connected
lead is negative while the gear shift is in RE-
VERSE (R) position
Selecting the video of rear
display
When the navigation image is displayed on
front display, you can select either showing
the navigation image on rear display or a video
of a selected source.
! Only when a Pioneer navigation unit is con-
nected to this unit, you can switch the
video of rear display.
! When selecting SOURCE in REAR DISP,
when the selected source is an audio
source, nothing is displayed on rear dis-
play.
1 Touch A.MENU and SETUP and then
touch REAR DISP.
2 Touch c or d to select the video on rear
display.
Touch c or d until the desired video setting
appears in the display.
! SOURCE Display the video of the selected
source on rear display
! NAVI Display the navigation image on
rear display
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
1 Touch A.MENU and SETUP and then
touch FLAP SET.
2 Touch a and the LCD panel slides to the
back.
# Touch b and the LCD panel slides to the front.
3 Touch c or d to select the display to
open/close automatically or manually.
Touch c to select MANUAL, and you have to
press OPEN/CLOSE to open/close the display.
Other Functions
En
66
Section
13