Setting digitaland analog audio output, Automatic playback of dvds, Setting up the dvd player – Pioneer AVX-P8DVD User Manual

Page 61

Notes

! Linear PCM output of DTS audio is not possi-

ble. If you select LPCM, DTS audio is not out-
put.

! When using an amplifier and decoder that are

not Dolby Digital compatible, select LPCM.

Setting digitaland analog

audio output

You can set linear PCM audio output for both

digital and analog output. Set audio output

correctly to match the components you are

using with this unit.

! When using digital connections, select

48kHz.

! When using analog connections, select

96kHz.

Important

If the setting is incorrect there will be no sound
so be sure to read the manuals of the connected
components.

1 Touch SETUP and AUDIO and then

touch AUDIO OUT.

2 Touch either of the following touch

panel keys to select the audio output set-

ting.

! 48kHz A 48 kHz signal is output regard-

less of the audio sampling frequency. A 96
kHz signal is converted to a 48 kHz signal.
(initial setting)

! 96kHz The signal is output with the same

frequency as the audio sampling frequency.
With a 96kHz signal, you can enjoy excep-
tionally high sound quality.

Notes

! With discs featuring 96 kHz recording, if you

select 96kHz, audio is not output from digital
output.

! With discs that do not feature a CSS (Content

Scrambling System) copy guard signal, a 96
kHz digital signal is output.

! When using this unit with a Pioneer multi-

channel processor (DEQ-P8000), select
48kHz. If you select 96kHz, no sound will be
output when playing discs featuring 96 kHz re-
cordings.

Automatic playback of DVDs

When a DVDs disc with DVD menu is inserted,

this unit will cancel the DVD menu automati-

cally and start playback from the first chapter

of the first title.

! Some DVDs may not operate properly. If

this function is not fully operated, turn this

function off and start playback.

1 Touch SETUP and NEXT and then touch

OTHERS.

2 Touch DVD A. PLAY.

3 Touch a to turn automatic playback on.

# To turn automatic playback off, touch b.
# When the automatic playback is on, you can-
not operate repeating play of DVD disc (refer to
Repeating play on page 29).

Setting up the DVD player

Section

Setting

the
DVD

player