Panasonic GP-KS162CUD - Manual (Page 9)

-7-
SPECIFICATIONS
(with the combination of Optional Camera Head GP-KS162H)
Pick-up Device : 1/2-inch Interline transfer CCD image sensor with 768 (H) x 492 (V) pixels
Horizontal Resolution : 480 lines
Minimum Scene Illumination : 0.3 footcandles (3 lux) (F1.4 with AGC ON more than 30 IRE of Y signal with set up)
0.5 footcandles (5 lux) (F1.6 with AGC ON more than 30 IRE of Y signal with set up)
Signal to Noise Ratio : 50 dB (Standard condition, Y signal)
Video Output : 1.0 Vp-p/75 ohms, composite video, BNC connector x 2)
Scanning System : 2:1 Interlace
Synchronization : Internal Sync only
White Balance : Auto Tracing White Balance(ATW)/Auto White Balance Control(AWC)/Manual(MANU)
Gain Control : Auto Light On/Off, Video Level(Off/Manual)
Switches : White Balance Mode (ATW/MANU/AWC), AWC SET(SET), Auto Light ,
Video Level(Off/Manual)
Controls : R,B gain, VIDEO Level
Power Source : 12V DC, 300 mA
Camera Cable Length : GP-CA162/2 Cable 6.6 feet(2-meter), GP-CA162/3 Cable 9.9 feet (3-meter),
GP-CA162/38 Cable 12.5 feet (3.8-meter), GP-CA162/10 Cable 33 feet(10-meter)
Ambient Temperature : 14°F - 104°F (
−
10°C - +50°C)
Dimensions : Camera Head : 2/3” (Diameter) x 1-1/2”(D), (17(Diameter) x 35.5 (D) mm)
Camera Control Unit : 4-11/16”(W) x 1-7/16”(H) x 6-1/8”(D)
(120 (W) x 36 (H) x 157 (D) mm)
Weight : Camera Head : 0.035 lbs (14 g)
Camera Control Unit : 1.2 lbs (550 g)
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
Optional Accessories
.
• Camera Cable GP-CA162/2, GP-CA162/3, GP-CA162/38 or GP-CA162/10
. • C-mount Adaptor GP-AD22TA
. • Wide Angle Lens GP-LM3TA or GP-LM7TA
. • Pinhole Lens GP-LP12TA
. • Tele Angle Lens GP-LM15TA or GP-LM24TA
• Camera Head GP-KS162H