Primera Technology 510212 User Manual

Page 50

Section 6: Installing and Setting Up the Printer Driver for Windows

Digital Label Press 3 User’s Manual

Write Direct to Port

Select this option if you wish to bypass Windows Print Spooler. It is recommended

you do not use this unless you are having difficulty printing through the Windows

Print Spooler.

Disable Target & Cut

Select this option if you wish to bypass the cut function and use only its print

function. This can be helpful if, for example, you are printing a large-format sign

or photo that does not require precision cutting.

Cut Only (Disable Print)

Select this option if you wish to bypass the print function and use only its cut

function. When the No Targets option is selected, the press operates similar to a

traditional cutter in that it is able to cut shapes and letters out of completely blank

label stock.

Orientation

Select either Portrait or Landscape. Selecting Portrait causes the page to print in a

vertical orientation. Selecting Landscape causes the page to print in a horizontal

orientation. An icon illustrating a printed page in the dialog box helps you

remember the difference between the two.

Calibrate

This option allows you to recalibrate your printer's ribbon sensor if the need

should ever arise. For more information on the printer's ribbon sensor and on the

calibration process, please refer to the end of Section 9. In most instances, this

calibration procedure should not be necessary.

Select OK again to return to the Printers window. Exit this window and you're

ready to go on to Section 7. All printer driver options you selected will stay the

same until you change them.

Impressa3.qxd 10/22/01 9:29 PM Page 45