Adjust loudspeaker volume, Intercom, Intercom another handset – Philips VOX300 User Manual
Page 19: Transfer an external call to another handset, Switch between an internal and external call, Call
19
EN
Call
2. Press
v
key again to return to normal mode.
Adjust loudspeaker volume
1. Press
:
key to select from
Volume 1
to
Volume 5
.
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you to make free internal
calls, transfer external calls from one handset to another and use the conference option.
Intercom another handset
To be able to use intercommunication feature, you must have at least 2 handsets registered to your base
station (see page 42 "To register an additional handset").
1. Press
c
key in stand-by mode.
2. Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 regis-
tered handsets, the handset numbers which are available for intercom will be displayed.
Press
m
ALL
to
call all the handsets or press the handset number to select a specific handset, e.g. press
2
to call
handset 2.
Transfer an external call to another handset
1. Press
c
key to put the external call on hold (the caller can no longer hear you).
2. Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 regis-
tered handsets, the handset numbers which are available for intercom will be displayed.
Press
m
ALL
to
call all the handsets or press the handset number to select a specific handset, e.g. press
2
to call
handset 2.
The called handset rings.
3. Press
r
key on the called handset to answer the internal call, where both internal callers can talk.
4. Press
e
key on the first handset to transfer the external call to the called handset.
Switch between an internal and external call
1. Press
c
key once to switch between an internal call and external call.
WARNING Activation of loudspeaker can suddenly increase the volume in the earpiece to a very
high level. Make sure the handset is not too close to your ear.
If the handset does not belong to CD530/535 range, this function may not be available.
If there is no answer from the called handset, press
c
key to resume the external call.