Panasonic RQT9223 - Manual (Page 26)

26
RQT9223
Enjoying the Home Theater
ENTER
SUB MENU
S
TV/VIDEO
WIRELESS READY SURROUND M.ROOM
INPUT SELECTOR
VOLUME
+ _
MULTI CH PROCESSING TrueHD D+ DTS-HD MULTI CH LPCM BI-AMP
SETUP MIC AUX
TUNE RETURN AUTO SPEAKER SETUP -SETUP OK SURROUND SPEAKERS A SPEAKERS B
S VIDEO VIDEO L - AUDIO - R
“ ”
“SURROUND”
“MULTI CH PROCESSING”
SURROUND SPEAKERS B SPEAKERS A
“WIRELESS READY SURROUND, M. ROOM”
INPUT SELECTOR
VOLUME
+ _
TUNE POWER POWER
Basic playback
1
To turn the unit on
Press [^].
• The standby indicator “^” goes off when you turn the unit on.
• You can also turn this unit on by pressing [POWER 8] on the unit.
2
Confirm “ A ” is displayed on the unit’s display.
• Check the “SURROUND” indicator is lighting up. If not, press [SURROUND] on
the unit to set surround playback (➔ pages 13 and 29).
3
To switch input sources
Press [INPUT SELECTOR] repeatedy.
FM  AM  CD  TV CABLE/SAT BD/DVD P. (Blu-ray Disc/DVD player)
 
GAME  OPTION P.  AUX VCR DVD R. (DVD recorder)
• You can also switch input sources using [INPUT SELECTOR] on the unit.
To play a DVD recorder with built-in VCR
(If the equipment has the output terminal specifically for DVD/VHS.)
(➔ page 17)
• To play a DVD: select “
DVD R. ”.
• To play a video cassette: select “ VCR ”.
4
Play the selected input source.
5
To adjust the volume
Press [ VOL +, – ].
Volume range: – – dB (minimum), –79dB to 0dB (maximum)
• You can also adjust the volume using [VOLUME +, –] on the unit.
• You can change dB value display to numeric value display (
➔ page 40).
 To finish the Home Theater
Be sure to reduce the volume and press [^] to turn the unit to standby.
Note
• See page 50 for digital signals that can be played on this unit.
• Images recorded with x.v.Color or Deep Color (➔ page 52) are also supported.
• If “
A ” is not displayed in step 2, press [SPEAKERS A].
• Press [SPEAKERS A] or [SPEAKERS B] to switch “ A ” and “ B ” on when bi-wire
speakers are connected (➔ page 22).
SA-BX500-PP (RQT9223-Y)_En.indd 26 6/27/2008 4:05:51 PM