Resetting the system, Using the language code list, Additional information 10 – Pioneer S-DV2T User Manual
Page 48
Additional information
10
48
En
Resetting the system
Use the front panel controls to reset all system
settings to the factory default.
•
With the system on, press
STANDBY/
ON
while holding down
USB.
The next time you switch on, all the system
settings should be reset.
Using the language code list
Some of the language options (see
Language
settings
on page 30) allow you to set your
preferred language from any of the 136
languages in the
Language code list
below.
1
Select ‘Other Language’.
2
Use
/
to select either a code letter or
a code number.
3
Use
/
to select a code letter or a code
number.
See the
Language code list
below for a
complete list of languages and codes.
EEP ERR
• Contact your Pioneer authorized service center or your dealer for servicing.
EXIT
• Appears when a menu is automatically exited after a set period of inactivity.
Message
Description
HTZ363DVD_EN_LF.book 48 ページ ２００７年３月１３日 火曜日 午後７時２９分