Improving poor fm reception, Reducing am reception noise, Memorizing stations – Pioneer S-DV2T User Manual
Page 14: Listening to station presets, Listening to other sources, Getting started 02
Getting started
02
14
En
Improving poor FM reception
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1
Tune to an FM radio station then press
SHIFT+SETUP
.
2
Use
/
to choose FM MODE then press
ENTER
.
3
Use
/
to select
FM MONO
then press
ENTER
.
The mono indicator (
) lights when the tuner
is in mono reception mode.
Select
FM AUTO
above to switch back to auto-
stereo mode (the stereo indicator (
) lights
when receiving a stereo broadcast).
Reducing AM reception noise
If AM reception seems particularly poor, or the
AM radio station you’re listening to seems
noisy, try using the Noise Cut feature for better
sound quality.
1
Tune to an AM radio station then press
SHIFT+SETUP
.
2
Use
/
to choose NOISECUT then press
ENTER
.
3
Use
/
to select the noise cut mode
then press
ENTER
.
Select an effect level between 1 and 3.
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1
Tune to an AM or FM radio station.
Select mono or auto-stereo reception (FM) or
the Noise Cut mode (AM) as necessary. These
settings are saved along with the preset.
2
Press
SHIFT+SETUP
and use
/
to
choose ‘ST.MEM.’ then press
ENTER
.
3
Use
/
to select the station preset you
want then press
ENTER
.
Listening to station presets
1
Make sure the
TUNER
function is
selected.
2
Use the
ST +/–
buttons to select a station
preset.
• You can also use the number buttons to do
this.
Listening to other sources
You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See
Connecting auxiliary
audio components
on page 33 for more on this.
• To connect a USB device to the USB
terminal, see
USB playback
on page 25.
1
Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Press
LINE
to select the source.
3
If necessary, start playback of the source.
HTZ363DVD_EN_LF.book 14 ページ ２００７年３月１３日 火曜日 午後７時２９分