03 listening to your system, Auto listening mode, Listening in surround sound – Pioneer S-DV2T User Manual
Page 15: Dolby pro logic ii music settings, Listening to your system, Listening to your system 03, Chapter 3
Listening to your system
03
15
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 3
Listening to your system
Auto listening mode
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
• If you set up the system for Front surround
(page 10), the Front Surround modes will
give the best results.
•
Press
SURROUND
to select the AUTO
listening mode.
1
Listening in surround sound
You can listen to stereo or multichannel
sources in surround sound.
2
Surround sound
is generated from stereo sources using one of
the Dolby Pro Logic decoding modes.
• If you set up the system for Front surround
(page 10), the Front Surround modes will
give the best results.
•
Press
SURROUND
repeatedly to select a
listening mode.
1
The choices that appear in the display will vary
according to the type of source that’s playing.
•
AUTO
– Auto listening mode (see above)
•
DOLBY PL
(Dolby Pro Logic) – 4.1 channel
surround sound (use with any two-channel
source)
•
MOVIE
(Dolby Pro Logic II Movie) – Pro
Logic II 5.1 channel surround sound,
especially suited to movie sources (use
with any two-channel source)
•
MUSIC
(Dolby Pro Logic II Music) – Pro
Logic II 5.1 channel surround sound,
especially suited to music sources (use
with any two-channel source)
•
STEREO
– See
Listening in stereo
below
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode, there are three settings you can adjust:
Center Width, Dimension, and Panorama.
1
With Dolby Pro Logic II Music mode
active, press
SOUND
.
2
Use
/
to select ‘C WIDTH’, ‘DIMEN.’ or
‘PANORAMA’ then press
ENTER
to confirm.
•
C WIDTH
(Center Width) – Provides a
better blend of the front speakers by
spreading the center channel between the
front right and left speakers, making it
sound wider (higher settings) or narrower
(lower settings).
•
DIMEN.
(Dimension) – Adjusts the depth
of the surround sound balance from front
to back, making the sound more distant
(minus settings), or more forward (positive
settings).
•
PANORAMA
– Extends the front stereo
image to include the surround speakers for
a ‘wraparound' effect.
Note
1 If the source is Dolby Digital or DTS, the corresponding indicator lights in the front panel display.
2 Note that when the tuner is selected, multichannel playback is not possible.
TEST TONE
MCACC
SURROUND
SOUND
ADVANCED
TUNE
F.S.SURR
TEST TONE
MCACC
SURROUND
SOUND
ADVANCED
TUNE
F.S.SURR
HTZ363DVD_EN_LF.book 15 ページ ２００７年３月１３日 火曜日 午後７時２９分