Pioneer S-DV2T - Manual (Page 38)

Additional information 10
38
En
Chapter 10
Additional information
Optional system settings
All the available settings in the standby setup
menu are listed below. See the notes in each
section for more information about the
settings. The first setting in each section is the
default.
1 Switch the system into standby.
2 Press SHIFT+SETUP and use / then
ENTER to choose the setting you want to
adjust.
The available settings are shown in the front
panel display. 1
3 Use / to adjust then press ENTER to
confirm and exit.
System demo setting
Switches the automatic demo feature on or off
(this starts when you plug in for the first time):
• DEMO ON – Switches the demo feature on.
• DEMO OFF – Switches the demo feature off.
Frequency step setting
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region.
• AM 9K
• AM 10K
DTS CD setting
If you play a DTS-encoded CD, you will need to
change this setting to hear the decoded signal.
• NORMAL – Regular CD playback; some
DTS-encoded CDs output a noisy signal.
• DTS-CD – Proper decoding of DTS-
encoded CDs; the beginning of regular CD
tracks may be skipped.
Key lock setting
• LOCK ON – Makes the front panel buttons
and controls inoperative.
• LOCK OFF – Restores regular use of the
front panel buttons and controls.
Setting the sleep timer
The sleep timer switches off the system after
about an hour so you can fall asleep without
worrying about it. 2
• Press SLEEP repeatedly to select an
option.
Choose between the following options:
• SLP ON – Switches off after about an hour
• SLP OFF – Cancels the sleep timer
After selecting SLP ON , you can press SLEEP
again to check how much time is left. Each line
indicates approximately 12 minutes
(remaining):
Note
1 The setup menu is exited automatically after 5 minutes of inactivity.
2 The display dims when the sleep timer is set, and the power indicator is turned off.
S L P - - - - -
HTZ363DVD_EN_LF.book 38 ページ ２００７年３月１３日 火曜日 午後７時２９分