Panasonic Panafax UF-7950 - Manual (Page 86)

86
Setting Your Machine
Fax Parameters
056 COVER SHEET *1 Off Setting the home position of the Cover Sheet parameter in
the Select Mode.
2 On
058 LANGUAGE *1 A-ENGLISH Selects the default message language for the display.
2 C-FRENCH
3 SPANISH
077 DEPARTMENT CODE *1 Invalid Selecting whether the machine performs the Department
Code operation.
2 Valid
082 QUICK MEMORY XMT 1 Invalid Selecting whether the machine performs Quick Memory
Transmission.
Invalid : Stores all documents into memory first before
dialing the telephone number.
Valid : Starts dialing the telephone numberimmediately
after storing the first page.
(This feature is not available when the Fax Parameter No.
133 (Job Build) is set to "2:On". )
*2 Valid
088 LINE SELECTION *1 Auto Selecting the transmitting telephone line when the optional
G3 Communication Port Kit is installed.
Auto
: Selects the available telephone line for
transmission automatically.
Line-1 : Selects Line-1 as the only transmitting telephone
line.
Line-2 : Selects Line-1 as the only transmitting telephone
line.
Note: Regardless of the setting selection above, the unit
will answer, and receive on both telephone lines.
2 Line-1
3 Line-2
095 DUPLEX PRINT *1 Invalid Selecting whether the machine performs duplex print when
receiving the document via G3 Fax, or Internet Fax.
2 Valid
097 SPECIAL TRAY
No.1 - 2
*1 None Select a Special Tray that will not be used for printing
received faxes (Tray 1 or 2). One Tray must always be
available for receiving Faxes. This setting is available when
the 2nd Paper Feed Module Option is installed.
2 Tray 1
3 Tray 2
099 MEMORY SIZE
(SD Memory Card)
- - Displays the amount of memory size. (When SD card is
installed, shows the size of the SD memory card)
118 FAX FUNCTION DETECT 1 Invalid Setting the number of digits required for the machine to
determine the entered number is a Fax Telephone number.
Upon detecting the specified number of digits, the machine
will automatically switch to the FAX Mode when it is in the
Copier Mode.
2 4-Digit
3 5-Digit
*4 6-Digit
5 7-Digit
6 8-Digit
119 QWERTY KEYBOARD *1 One-Touch Selecting whether the QWERTY Keyboard functions as
One-Touch Dialing Keys, or as Quick Name Search Keys of
the station name.
One-Touch :
Each letter key is assigned with an Email
Address, or a Telephone Number for quick
dialing.
Quick Name Search :
Entering the letter(s) of the station name for
quick name search of the programmed
station, and quick dialing.
2 Quick Name
Search
121 Auto Reset Timer 1 Off Selecting whether the control panel reset time.
2 30 sec.
*3 1 min.
4 2 min.
5 3 min.
6 4 min.
No. Parameter
Setting
Number
Setting Comments