Panasonic LSQT1060 C - Manual (Page 29)

29
Basic Operation
Automatically searches and adds receivable
channels to memory.
Press MENU to display the Main Menu screen.
Press to select “Setup” icon.
Press to display the Setup
menu.
Press to display the Program
channel menu.
Press to select “Program
channel”.
Press to select “Auto”.
1
Automatic program setting
2
3
Press to enter the Auto menu.
Notes:
• Some channels with very weak signals may be locked into
memory. If desired, these channels can be deleted man u al ly
using the “Manual program setting”. (p. 30)
• “Auto program” must be done when you select the input
signal for the first time or whenever you change the antenna
configuration.
Press to select “ANT In”.
4
Press to select “Antenna” or
“Cable”.
Press to select “Mode”.
5
Press to select “All” or
“Analog”.
Press to start Scan.
Press to select “Start scan”.
6
Picture
Audio
Timer
Lock
Memory card
Setup
Menu
Now scanning analog channel...
Progress
CH scan All
Language
Program channel
Input labels
CC
Other adjust
Setup
Auto
Manual
Signal meter
Program channel
ANT In ◄ Cable ►
Mode All
Start scan
Auto program
ANT In Cable
Mode ◄ All ►
Start scan
Auto program
7 After Auto program is complete, the unit will return
to Manual program mode. To place the channels
that were located by auto scan in memory, move the
cursor to “Apply” and press OK. (p. 30-31)
If OK is not pressed after selecting APPLY, the
channels will not be memorized.