Patton electronic COPPERLINK 2160 - Manual (Page 88)

Setup Command Menu 88
Model 2160 Series User Manual 5 • Console and Telnet configuration
DHCP Server
The dhcp command menu lists commands for configuring DHCP settings. Move the cursor “ >>” to dhcp in
the setup menu and press Enter. The following menu displays:
The generic command menu lists commands for configuring general DHCP settings. Move the cursor “ >>” to
generic in the dhcp menu and press Enter. The following menu displays:
DHCP Fixed Host
The dhcp command menu lists commands for configuring DHCP settings. Move the cursor “ >>” to dhcp in
the setup menu and press Enter. The following menu displays:
The fixed command menu lists commands for configuring a Fixed Host IP Address list. Move the cursor “ >>”
to fixed in the dhcp menu and press Enter. The following menu displays:
>> generic DHCP server generic parameters
fixed DHCP server fixed host IP list
list Show DHCP configuration
>> active Trigger DHCP server function
gateway Default gateway for DHCP client
netmask Subnet mask for DHCP client
ip_range Dynamic assigned IP address range
lease_time Configure max lease time
name_server1 Domain name server1
name_server2 Domain name server2
name_server3 Domain name server3
Table 30. DHCP Command Descriptions
Command Description
Active Trigger DHCP server function
Gateway Configure default gateway for DHCP client
Netmask Configure subnet mask for DHCP client
IP Range Configure dynamic assigned IP address range
Lease Time Set up dynamic IP maximum lease time
Name Server 1 Set up the IP address of name server #1
Name Server 2 Set up the IP address of name server #2
Name Server 3 Set up the IP address of name server #3
generic DHCP server generic parameters
>> fixed DHCP server fixed host IP list
relay DHCP relay parameter
list Show DHCP configuration
>> add Add a fixed host entry
delete Delete a fixed host entry