Philips CDR-795 - Manual (Page 19)

Recording a single track
You can copy various tracks from different CDs and then
decide either to finalize or not to finalize.
1 Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2 Play your desired track on the CD player.
3 Press REC to enter the recording menu.
➜ REC TR with the tracknumber and PRESS REC are
displayed alternately.
4 Press REC again to start recording of the track.
➜ REC is shown, recording starts from the beginning of the
selected track and the actual recording time left starts to
count down.
5 To record further tracks repeat steps 2–4.
0 0 When you press
/ OPEN/CLOSE on the CD recorder side,
➜ CD NOT FINAL and PRESS REC TO FINALIZE are
displayed alternately.
Decide now, either
not to finalize: the CDR is not ready to play on other
CD players, however, other tracks or CD text can still
be added.
Press
/ OPEN/CLOSE on the CD recorder side again or
wait a few seconds.
➜ The drawer is opened.The CDR(W) is not finalized.
or
to finalize: the CDR is ready to play on other
CD players, however, no other tracks or CD text can
be added.
Press REC to start finalizing.
➜ FINAL is displayed and the actual finalizing time
remaining will start to count down.
Making and recording a program
You can make your own program, record it and decide then
either to finalize or not to finalize. However, please note,
that you cannot record a program which contains tracks
from the CD player and CD recorder. In that case
2 DISC PROG and NOT POSSIBLE will be displayed.
1 Load a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2 Load the CD from which you wish to record in the
CD player tray.
3 Select and store all desired tracks from the CD (see
“Programming track numbers”).
0 0 If the total time of the program is longer than the remaining
recording time of the CDR(W):
➜ DOES NOT FIT will be displayed briefly.
➜ MISSING and the time that cannot be recorded are
displayed.
If you nevertheless start recording, the recording goes on
until the CDR(W) is full.
4 Press REC to enter the recording menu.
➜ REC PROGRAM? and PRESS REC are displayed alternately.
5 Press REC again to start recording of the current program.
➜ REC is shown, recording starts and the actual recording
time left starts to count down.
0 0 When you press
/ OPEN/CLOSE on the CD recorder side,
➜ CD NOT FINAL and PRESS REC TO FINALIZE are
displayed alternately.
Decide now, either
not to finalize: the CDR is not ready to play on other
CD players, however, other tracks or CD text can still
be added.
Press
/ OPEN/CLOSE on the CD recorder side again or
wait a few seconds.
➜ The drawer is opened.The CDR(W) is not finalized.
or
to finalize: the CDR is ready to play on other
CD players, however, no other tracks or CD text can
be added.
Press REC to start finalizing.
➜
FINAL is displayed and the actual finalizing time
remaining will start to count down.
Internal recording
19
English