Philips CDR-795 - Manual (Page 16)

SHUFFLE and REPEAT
Repeating a track, a disc or a program
1 Press REPEAT repeatedly on the remote control during
playback to select either:
➜ REP TRACK :The current track is played repeatedly.
➜ REP DISC :The entire selected disc is played repeatedly.
➜ REP ALL : All discs in the unit (or the program) are (is)
played repeatedly.
Notes:
REP DISC is not possible during SHUFFLE or while playing a
program.
REP TRACK is not possible during SHUFFLE.
2 Playback starts in the chosen mode.
0 0 To return to normal playback press REPEAT on the remote
control until the display indication disappears.
Playing tracks in random order
● Press SHUFFLE before or during playback.
➜ SHUFF ALL is shown and either all tracks of the program
or of all loaded disc(s) in the CD player and
CD recorder are played in random order.
CD text display
This feature allows you to display information such as album
title or track title contained on a specially encoded CD.
● Make sure to insert a CD with CD text.
➜ CD TEXT is shown and the album artist’s name and
album title is scrolled once.
CD text when playback is stopped
● Press CD TEXT/edit on the remote control to see the
following information, which will be scrolled once (if available):
➜ Album artist’s name
➜ Album title
CD text during playback
● Press CD TEXT/edit on the remote control to see the
following information, which will be scrolled once (if available):
➜ Track artist’s name
➜ Track title
ID3-tag
This feature allows you to display information such as album
title or track title contained in an MP3-track.
● If you created an ID3-tag for your MP3-track, press
CD TEXT/edit on the remote control during playback to
show the following ID3-tag information:
➜ Album title
➜ Track artist’s name
➜ Track title
Note: In case there is no ID3-tag available,
NO TEXT will be
displayed.
Programming track numbers
A program can be used for playback or for specifying the
tracks which will be recorded.You can select up to 99 tracks
(also MP3 tracks) and store them in the memory. It is possible
to store any track more than once, in any order over
CD player and CD recorder. However, it is not possible to
combine MP3 tracks and audio tracks or MP3 tracks from
more than one CD.
1 Load the desired disc(s) in the disc tray(s).
2 Press PROGRAM on the remote control to enter the
program menu.
➜ PROG starts blinking and
PROGRAM is displayed.
➜ The step number ( STEP ), the track number and playing
time of the actual track on the current CD are displayed.
3 If you wish to choose a track from the CD player:
Press CD on the remote control and then í or ë as
often as necessary to skip to the desired track.
If you wish to choose a track from the CD recorder:
Press CDR on the remote control and then í or ë as
often as necessary to skip to the desired track.
Note: When selecting a track which has been stored already,
P will be displayed.
4 Press PROGRAM on the remote control to store your
selection in the memory.
➜ The total number of programmed tracks ( STEP ),
PRG
and the total program time are displayed.
5 Repeat steps 3–4 to select and store all desired tracks.
Note: If you try to store more than 99 tracks,
PROGRAM FULL will be displayed.
6 Press Ç to end programming.
Clearing the program
1 If necessary press Ç to stop playback.
2 Keep Ç pressed to clear the program.
➜ PROG CLEARED is displayed and
PROG goes off.
Basic functions
16
English