Panasonic KX-FPG378 - Manual (Page 78)

8. Programmable Features
76
8.7 Programming features
{ 1}{1} Changing the ringer volume
{ 1} Low
{ 2} Medium
{ 3} High (default)
{ 0} Off
See page 27 for details.
{ 1}{2} Setting ringer tone for outside calls
To set the handset ringer tone from one of 7
patterns for outside calls. You can select “
Tone
1” (default), “Tone 2”, “Tone 3”, “Melody
1”, “Melody 2”, “Melody 3” or “Melody 4”.
{
1} “ Tone 1” (default)
{ 2} “ Tone 2”
{ 3} “ Tone 3”
{ 4} “ Melody 1”
{ 5} “ Melody 2”
{ 6} “ Melody 3”
{ 7} “ Melody 4”
{ 2} Playing back messages
See page 61.
{ 5} Setting voice enhancer feature
{ 1} “ On”
{ 0} “ Off” (default)
See page 32 for details.
{ 0}{1} Changing the handset display
contrast
You can adjust the handset display contrast.
{
1} Level 1
{ 2} Level 2
{ 3} Level 3 (default)
{ 4} Level 4
{ 5} Level 5
{ 6} Level 6
Note:
L To change the base unit display contrast, see
feature #39 on page 71.
{ 0}{2} Setting the key tone
You can select whether or not key tones are
heard when keys are pressed. Includes
confirmation tones and error tones.
{
1} “ On” (default): You will hear key tones.
{ 0} “ Off”: Deactivates this features.
{ 0}{3} Setting auto talk feature
This feature allows you to answer a call by lifting
the handset off the base unit without pressing
{
TALK} or {SP-PHONE}.
{ 1} “ On”
{ 0} “ Off” (default)
Note:
L If you subscribe to Caller ID service and want
to view the caller’s information on the
handset display after lifting up the handset to
answer a call, turn OFF this feature.
{ 0}{4} Setting the Caller ID number auto
edit feature
{
1} “ On” (default)
{ 0} “ Off”
See page 42 for details.
{ 0}{5}{1} Setting dialing mode
If you cannot make calls, change this setting
depending on your telephone line service.
{
1}“ Pulse”: For rotary pulse dial service.
{ 2}“ Tone” (default): For tone dial service.
Note:
L You can also program this feature with the
base unit (feature #13 on page 70).
{ 0}{5}{2} Setting the flash time
The flash time depends on your telephone
exchange or host PBX.
{
1} “ 700ms” (default)
{ 2} “ 600ms”
{ 3} “ 400ms”
{ 4} “ 300ms”
{ 5} “ 250ms”
{ 6} “ 110ms”
{ 7} “ 100ms”
{ 8} “ 90ms”
Note:
L If the unit is connected via a PBX, PBX
functions (transferring a call etc.) might not
work correctly. Consult your PBX supplier for
the correct setting.
L You can also program this feature with the
base unit (feature #72 on page 73).
{ 0}{5}{3} Setting line mode
The line mode is preset to “ B” and generally
should not be adjusted. If “ Line in use” is not
displayed on the handset properly, the line mode
selection is incorrect. Set line mode to “
A”.
{ 1} “ A”
{ 2} “ B” (default)
FPG379-PFQX2138ZA-en.book Page 76 Wednesday, January 12, 2005 4:49 PM