Panasonic KX-FPG378 - Manual (Page 72)

8. Programmable Features
70
{#}{ 1}{3} Setting the dialing mode
DIALING MODE
MODE=TONE [ ±]
If you cannot make calls, change this setting
depending on your telephone line service.
{
1} “ PULSE”: For rotary pulse dial service.
{ 2} “ TONE” (default): For tone dial service.
Note:
L You can also program this feature with the
handset (page 76).
{#}{ 1}{6} Setting the recording paper size
PAPER SIZE
=LETTER [ ±]
{ 1} “ LETTER” (default): Letter or legal size
paper.
{
2} “ A4”: A4 size paper.
{#}{ 1}{7} Setting the ringer tone for outside
calls
RINGER TONE
MODE=A [ ±]
{ 1} “ A” (default)
{ 2} “ B”
{ 3} “ C”
Note:
L To set the handset ringer tone, see page 76.
8.4 Advanced features
{#}{ 2}{2} Setting the journal report to print
automatically
AUTO JOURNAL
MODE=ON [ ±]
{ 1} “ ON” (default): The unit will print a journal
report automatically after every 30 new fax
transmissions and receptions (page 48).
{
2} “ OFF”: The unit will not print a journal report,
but will keep a record of the last 30 fax
transmissions and receptions.
{#}{ 2}{3} Sending documents overseas
OVERSEAS MODE
MODE=ERROR [ ±]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
{
1} “ NEXT FAX”: This setting is effective only for
the next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
{
2} “ OFF”: Deactivates this feature.
{ 3} “ ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document.
Note:
L This feature is not available for broadcast
transmission.
L Calling charges may be higher than usual.
{#}{ 2}{5} Sending a fax at a specific time
DELAYED SEND
MODE=OFF [ ±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
{
1} “ ON”
{ 2} “ OFF” (default)
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 47).
3. Press {MENU}.
4. Press {#} then {2}{5}.
5. Press {1} to select “ ON”.
6. Press {SET}.
FPG379-PFQX2138ZA-en.book Page 70 Wednesday, January 12, 2005 4:49 PM