Panasonic KX-FPG378 - Manual (Page 31)

2. Preparation
29 For Fax Advantage assistance, call 1-800-435-7329.
Initial Programming
2.11 Date and time
1 Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[( )]
2 Press {#}, then {0}{1}.
SET DATE & TIME
PRESS SET
3 Press {SET}.
L The cursor ( | ) will appear on the display.
M: | 01/D:01/Y:05
TIME: 12:00AM
4 Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2005
Press {0}{8} {1}{0} {0}{5}.
M:08/D:10/Y:05
TIME: | 12:00AM
5 Enter the current hour/minute by selecting 2
digits for each. Press {*} to select “
AM” or
“ PM”.
Example: 10:15 PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
M: | 08/D:10/Y:05
TIME: 10:15AM
2. Press {*} repeatedly to display “ PM”.
M: | 08/D:10/Y:05
TIME: 10:15PM
6 Press {SET}.
L If 3 beeps sound, the setting is not
correct. Start again from step 4.
SETUP ITEM [ ]
7 Press {MENU} to exit.
Note:
L The other party’s fax machine will print the
date and time on the top of each page you
send according to your unit’s date and time
setting.
L The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
If you have subscribed to a Caller ID
service
The date and time will be automatically set
according to the received caller information.
L If the time has not previously been set, Caller
ID will not adjust the clock.
{ SET}
{ MENU}
{<}{>}
FPG379-PFQX2138ZA-en.book Page 29 Wednesday, January 12, 2005 4:49 PM