Network setup parameters vs. connection type – Pantech WV-NW474S User Manual
Page 22
![background image](/manuals/178627/22/background.png)
-22-
■ Network Setup Parameters vs. Connection Type
Connection type
Item
Parameter description
Connection type 1
IP address
Enter "192.168.0.XXX" (where XXX should be a number from 2 to
254 except the same IP addresses already assigned to the PC or
any other cameras).
Net mask
Use the default setting "255.255.255.0" for the subnet mask.
Default gateway
192.168.0.1
Host name
NW_Camera
Network speed
Select the network speed by pressing the [o] button.
Selectable parameters: Auto (default setting), 100 Mbps (full
duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps
(half duplex) Using Auto is recommended.
HTTP port
Use the default setting "80" for the HTTP port.
DHCP
Click OFF.
DNS
Click OFF.
Primary DNS
0, 0, 0, 0
Secondary DNS
0, 0, 0, 0
DDNS
Click OFF.
Host name
None
User name
None
Password
None
Access interval
None
Connection type 2
IP address
Enter the IP address assigned by your network administrator.
The setting is not required if DHCP is used in an intranet.
Net mask
Enter the Net mask assigned by your network administrator.
The setting is not required if DHCP is used in an intranet.
Default gateway
Enter the IP address of the default gateway assigned by your net-
work administrator.
The setting is not required if DHCP is used in an intranet.
Host name
Contact your network administrator and enter the assigned host
name if required.
Network speed
Select the network speed by pressing the [o] button.
Selectable parameters: Auto (default setting), 100 Mbps (full
duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps
(half duplex) Using Auto is recommended.
HTTP port
Use the default setting "80" for the HTTP port.
DHCP
Click ON if the intranet uses DHCP.
DNS
Click ON when using the DNS server.
Primary DNS
0, 0, 0, 0
Secondary DNS
Enter the IP address of DNS when using the DNS server.
Contact your Internet service provider for the IP address of DNS.
Primary and secondary IP addresses can be set for the DNS.
DDNS
Click ON when using DDNS function.
Host name
Ask your administrator
User name
Ask your administrator
Password
Ask your administrator
Access interval
Ask your administrator