Panasonic PV C2033W - Manual (Page 16)

16 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] 16 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1
ON-TIMER with Alarm Ready Check List
The clock is set to the correct time. This unit can be set to automatically power on in one of 3
modes (TV, Playback, or FM radio).
You can also combine the On-Timer with a one minute
alarm that gradually increases in volume.
• If no button on the remote or unit
(including a button used to turn
off the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
Press PROG to display SET PROGRAM screen.
2
3
1) Press to select
desired settings.
2) Press to set the
ON-TIMER TIME or
ON-TIMER mode.
• Make sure a tape is inserted if Playback mode is selected.
• See “FM Radio” on pages 20 and 21 for instructions on how to
preset FM stations.
• ON-TIMER mode
selection order
4
Press to select
ALARM “ON” or “OFF.”
When “ON” is selected, an alarm will gradually increase
in volume for one minute or until canceled by pressing any
button (including VOL + -).
To Make Corrections, use and to move back
and correct.
5
Press PROG to set ON TIMER.
• “ON TIMER SET” is displayed.
• ON TIMER Indicator lights on the unit.
To Cancel ON-TIMER,
Repeat steps 1 and 2. Then, press ADD/DLT to clear the
time in step 3. Now, press PROG to end.
“ON TIMER END” briefl y appears on-screen.
1) Press to select “ON
TIMER.”
2) Press to display ON
TIMER screen.
ON TIMER
SET PROGRAM
T I MER PROGRAMMING
SELECT : SET :
END : PROG
ON T I MER
6:--AM CH --
ALARM : ON
SELECT : SET :
END : PROG
CH01 PLAY
CH125 CH02 CH03
FM1 FM9 FM8
ON T I MER
6:00AM CH08
ALARM : ON
CANCEL : ADD / DLT
SELECT : SET :
END : PROG
TV Timer Features
Note
VIDEO IN AUDIO IN
POWER VOL CH STOP/EJECT REW/ PLAY/REPEAT FF/ REC TIMER/FM
ACTION
REC ON TIMER PROG TIMER
ON TIMER
indicator CH
TIMER/FM