beautypg.com

Adjusting loudness 174, Using subwoofer output 174, 31 customizing preferences – Pioneer SUPER TUNER 3 D AVIC-Z120BT User Manual

Page 174: Adjusting loudness, Using subwoofer output

background image

— AV1 and AV2

— SD and USB

! The different source volume level can be

set between

iPod and USB.

! When “Flat” is selected, no supplement or

correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
“Flat” and a set equalizer curve.

1

Display the

“AV Sound Settings”

screen.

= For details, refer to Displaying the “AV

Sound Settings

” screen on page 171.

2

Touch [EQ].

3

Touch one of the keys to select a curve

that you want to use as the basis of custo-
mizing.

4

Touch [Customize].

5

Touch the frequency that you want to

adjust the level.

6

Touch [a] or [b] to adjust the level of

the equalizer band.
Each time you touch [a] or [b], the level of
the equalizer band increases or decreases.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.

1

Display the

“AV Sound Settings”

screen.

= For details, refer to Displaying the “AV

Sound Settings

” screen on page 171.

2

Touch [Loudness].

Each time you touch [

Loudness], the level is

selected in the following order:
Off

— Low — Mid — High

Using subwoofer output

The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.
p This function is not available when “Sub

Woofer

” is “Off”.

1

Display the

“AV Sound Settings”

screen.

= For details, refer to Displaying the “AV

Sound Settings

” screen on page 171.

2

Touch [Sub Woofer].

3

Touch [On] to turn subwoofer output

on.
To turn subwoofer output off, touch [

Off].

4

Touch [Reverse] or [Normal] to select

the phase of subwoofer output.

5

Touch [+] or [

–] next to “Level” to adjust

the output level.
“+6” to “–24” is displayed as the level is in-
creased or decreased.

6

Touch [c] or [d] next to

“Frequency(Hz)” to select cut-off fre-
quency.
Each time you touch [c] or [d], cut-off fre-
quencies are selected in the following order:
50Hz

— 63Hz — 80Hz — 100Hz — 125Hz

Only frequencies lower than those in the se-
lected range are output from the subwoofer.

En

174

Chapter

31

Customizing preferences

This manual is related to the following products: