3 install your phone, Install your phone, Install battery – Philips UCZZ01927AB User Manual
Page 14
12
Getting started
bracket and
➁ rotating the bracket
outward.
2
Turn the bracket around.
3
Attach the bracket to the opposite
side of the base station.
4
Insert screws (not included) into
the wall.
5
Align the mounting holes on the
back of the base with the screws on
the wall.
6
Slide the base down into place.
3.3
Install your phone
Before using the handset, the batteries
have to be installed and fully charged.
When the batteries are inserted for the
first time, the unit will not be able to
start normally due to the low battery.
You must charge the batteries on the
base station before you can use the
handset.
3.3.1 Install battery
Always use AAA rechargeable batteries
supplied with your unit. If alkaline
batteries are used instead of
rechargeable batteries, “WARNING
BATT” will show on the display and the
battery icon will blink quickly.
1
Slide out the battery cover.
Warning
Warning
5.20
5.20
17.00
83.00