Panasonic KX-HCM280A - Manual (Page 91)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 91
2.17 Buffering or Transferring Images by Alarm
Signal
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
An external sensor connected to the external I/O terminal can be used with the
buffer/transfer by alarm feature. When the sensor is triggered, the camera can
buffer or transfer images by alarm.
1. Click [Buffer/Transfer] on the Setup page.
2. Click [No.] to enable buffer/transfer.
3. Check [Enable Image Buffer/Transfer], select [Alarm] for trigger, select [Rising:
GND to Open (High).] or [Falling: Open (High) to GND.] and click [Next>].
Note
• Click [Delete Buffered Images] to delete this buffered images.
• Click [Save] to save the settings.
• Clicking [Cancel] takes you back to the Image Buffer/Transfer page without
saving changes.