Maintenance and lubrication – Polaris Predator User Manual
Page 113
110
MAINTENANCE AND LUBRICATION
Oil and Filter Change
14. Replace the o-ring in the cover.
15. Lubricate the gasket on the new filter with a film of fresh engine oil.
16. Reinstall the spring and install the new filter with the open end facing outward.
17. Install the cover and torque the bolts to 72-78 in. lbs. (8-9 Nm). NOTE: The long bolt
must be placed in the forward hole.
Step 14
Step 16
Step 17
This manual is related to the following products:
See also other documents in the category Polaris Cars:
- Sportsman 6x6 (136 pages)
- Sportsman 6x6 (133 pages)
- Sportsman 500 EFI X2 (157 pages)
- Predator 50 (184 pages)
- Predator 50 (148 pages)
- Predator 50 (191 pages)
- Predator 50 (186 pages)
- Predator 50 (192 pages)
- Predator 50 (199 pages)
- Predator 50 (199 pages)
- Predator 50 (188 pages)
- Predator 50 (207 pages)
- Predator 50 (220 pages)
- Predator 50 (199 pages)
- Predator 50 (189 pages)
- 800 RMK 144/155 (176 pages)
- 800 RMK 144/155 (135 pages)
- 800 RMK 144/155 (141 pages)
- 800 RMK 144/155 (159 pages)
- 800 RMK Shift (133 pages)
- 800 RMK 144/155 (160 pages)
- 800 RMK Shift (135 pages)
- 800 RMK 144/155 (134 pages)
- 600 IQ LX (154 pages)
- Predator 9920779 (191 pages)
- Sportsman 600 (200 pages)
- Sportsman 600 (220 pages)
- Sportsman 600 (202 pages)
- Predator (187 pages)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (2 pages)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- Sportsman 500 EFI Touring (149 pages)
- Sportsman 700 EFI X2 (163 pages)
- Series 10 Ranger 425 2x4 (104 pages)
- Series 10 Ranger 425 2x4 (121 pages)
- Sportsman 9922245 (133 pages)
- Sporstman X2 800 EFI (161 pages)
- SuperSport (1 page)
- SuperSport (1 page)
- SuperSport (1 page)