Polaris Predator - Manual (Page 112)

109
MAINTENANCE AND LUBRICATION
Oil and Filter Change
7. Place a drain pan beneath the crankcase and remove the drain plug.
8. Allow the oil to drain completely.
9. Replace the sealing washer and reinstall the plug. Torque to 14 ft. lbs. (19 Nm).
10. Place shop towels beneath the oil filter.
11. Remove the three cover bolts and remove the
cover.
12. Pull out the oil filter. NOTE: A spring located
behind the filter may pop out as the filter is
removed. The spring must be reinstalled with the
new filter.
13. Using a clean dry cloth, clean the filter sealing
surfaces.
Step 12