Panasonic MN101C77C - Manual (Page 505)

Chapter 17 Appendices
Probe Switches XVII-5
17-1-4 PRB-DMY101C77-M
Dummy target boards differ depending upon the models. This board can be used for only
101C77 64PIN.
When unconnected to the target, use this board with the PRB-MBB101C77-M .
Improper matching may cause any damage to the ICE.
Figure1: PRB-DMY101C77-M Layout
<
How to connect
>
Connector board: PX - CN101-M
MBB board: PRB-MBB101C77-M
Dummy target: PRB-DMY101C77-M
Make sure that the points
marked are put together.
[Caution1]
[Caution1]
Connect CNE of PRB-MBB101C77-M to CNE of PRB-DMY101C77-M, and CNF of
PRB-MBB101C77-M to CNF of PRB-DMY101C77-M.
When connecting the boards, make sure that they are connected without tilt.
If you put pressure on one side the board, that may cause any damage to the pins.