2 access filter, Parameter description – Planet Technology WAP-4030A User Manual

Page 16

3.1.2.2 Access

Filter

This Access Point allows you to provide a Filter List of MAC addresses that are allowed/denied

associating with this AP.

Parameter

Description

MAC Filtering

You can enable or disable the MAC Filtering function.

Filter Mode

If you select “Only deny PCs with MAC listed below to access this device”, then all the

PCs in the list will be denied to access and all other PCs will be allowed to access. If

you select “Only allow PCs with MAC listed below to access this device”, then all PCs

in the list will be allowed to access but all other PCs will be denied to access.

Filter List

Enter the MAC address of PC that will be managed by the MAC Filtering rule.

Please click “Apply” button to save the above configurations.