Promise Technology C6101SSWP000000-2 - Manual (Page 5)

SuperSwap Manual
3
Key Features
The following are key features of the Promise SuperSwap:
Drive Types
•
Supports standard IDE drives (Ultra ATA, DMA, and EIDE)
•
Supports Ultra ATA/100 and Ultra ATA/66.
ATA RAID “Hot Swap” Support
•
Supports Promise ATA RAID products allowing “hot swap” under
RAID 1, 3, or 5
•
Hot swap allows for easy repair/replacement of drives while PC
remains active
Status Indicators
2
•
Power/Drive Status LED shows power on/off when not used with
Promise SuperTrak100 or SuperTrak66 products
•
Power/Drive Status LED displays status of drive in array (online,
offline, critical (rebuilding/synchronizing) if used with Promise
SuperTrak100 or SuperTrak66 products
•
Disk Activity LED displays normal drive operation
Ultra ATA/100 Support
•
Passes all Ultra ATA/100 information to controller card
•
Allows auto-sensing of Ultra ATA/66 drive and implementation of
66MB/sec burst transfers
2
Note: Users must obtain and install Promise FastTrak Driver v.1.30 or later in
order to implement LED display functions for SuperSwap enclosure. Go to
www.promise.com to find these drivers.
Note: For proper monitoring functionality of Fan RPM, Voltage, & Temperature
users must install FastCheck for Fa stTrak Product Family or SuperCheck for
SuperTrak, please visit
www.promise.com for the latest software revisions.