ProForm ID555 - Manual (Page 6)

4 Important
• Do not use the product in places
where there are explosive hazards.
• Do not let small metal objects
come into contact with the
product. This can deteriorate audio
quality and damage the product.
• Do not allow the charger to come
into contact with liquids.
• Active mobile phones in the
vicinity may cause interference.
About operating and storage
temperatures:
• Operate in a place where
temperature is always between 0
and 35º C (32 to 95º F).
• Store in a place where
temperature is always between -
20 and 45º C (-4 to 113º F).
• Battery life may be shortened in
low temperature conditions.
1.3 Conformity
We, Philips declare that the product is
in compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC.
This product can only be connected to
the analogue telephone networks of
the countries mentioned on the
packaging.
You can find the Declaration of
Conformity on www.p4c.philips.com.
1.4 Using GAP standard
compliance
The GAP standard guarantees that all
DECT
TM GAP handsets and base
stations comply with a minimum
operating standard irrespective of
their make. Your handset and base
station are GAP compliant, which
means the minimum guaranteed
functions are: register a handset, take
the line, receive a call and dial. The
advanced features may not be
available if you use another handset
than an ID555 with your base station.
To register and use your ID555
handset with a GAP standard base
station of a different make, first
follow the procedure described in the
manufacturer’s instructions, then
follow the procedure described on
page 33.
To register a handset of another make
to the ID555 base station, place the
base station into registration mode
(page 33), then follow the procedure in
the manufacturer’s instructions.
1.5 Recycling and disposal
Disposal instructions for old
products:
The WEEE directive (Waste
Electrical and Electronic Equipment
Directive ; 2002/96/EC) has been put
in place to ensure that products are
recycled using best available
treatment, recovery and recycling
techniques to ensure human health
and high environmental protection.
Your product is designed and
manufactured with high quality
materials and components, which can
be recycled and reused.
Do not dispose of your old product
in your general household waste bin.
ID555_IFU_GB.book Page 4 Friday, July 18, 2008 2:06 PM