ProForm ID555 - Manual (Page 28)

26 Use more of your phone
Tip
To put the internal call on hold and
answer the incoming external call,
press
r
key.
5.10.4 Switch between an
internal and external call
To switch between an internal or
external call, press
c
key.
5.10.5 Establish a three-party
conference call
The conference call feature allows
one external call to be shared with
two handsets (in intercom). The
three parties can share the
conversation and no network
subscription is required.
During the call, press
c
key to
put the external call on hold (the
caller can no longer hear you).
• Intercom is established
immediately if there are only 2
registered handsets.
If there are more than 2
registered handsets, the handset
numbers which are available for
intercom will be displayed.
Scroll
:
to the specific handset
you want to call and press
m
SELECT .
• The called handset rings.
Press
r
key on the called
handset to answer the internal
call, where both internal callers
can talk.
• Intercom is established.
Press and hold
c
key for 2
seconds on the first handset to
start the three-party
conference.
•
CONFERENCE will be
displayed on the screen once
the conference call is
established.
Tip
If CONFERENCE mode is activated
(see “Activate/Deactivate
Conference mode” on page 31), a
three-party conference call is
automatically established if the
second handset takes the line when
there is already an external call in
progress.
5.11 Paging
The paging feature enables you to
locate a missing handset if the handset
is in range and contains charged
batteries.
Press
p
key on the base
station.
• All the registered handsets start
to ring.
Once retrieved, press any key
on the handset to end the
paging.
Note
If there are no key presses within 30
seconds, the handset and base station
will automatically return to idle
mode.
Tip
To stop paging, press
p
key on the
base station again.
1
2
3
4
1
2
ID555_IFU_GB.book Page 26 Friday, July 18, 2008 2:06 PM