ProForm ID555 - Manual (Page 48)

46 Telephone answering machine (TAM)
• A validation tone is emitted and
the screen returns to previous
menu.
10.6.2.2 Controlling the
Answering Machine
from an external call
From another phone, dial home.
• The answering machine answers
and starts playing your greeting
message.
Within 8 seconds, press # key on
the phone you use to dial and
enter the remote access code
(same as your master PIN code).
• If the remote access code is
incorrect, an error tone is
emitted. Enter the access code
again until you get the correct
number.
• If you did not enter the remote
access code within 10 seconds,
the answering machine will drop
the line immediately.
• If the remote access code (same
as your master PIN code) is
correct, you will hear a
validation tone.
• New messages (if any), will be
played automatically and stop
when there are no more new
messages.
Note
If there are no new messages, the
answering machine will not play any
messages.
The following table indicates how to
access the below features during
remote access procedure:
10.7 Call Screening
10.7.1 Call screening on
handset
If Handset call screening is set to ON ,
you can hear incoming messages via
the handset speaker and decide
whether or not to take the call. To
take the call, press
r
.
This feature is deactivated by default.
1
2
Press To
1
Press once to replay the
current message or twice
to go to previous
message
2 Play old messages
3 Go to next message
6
Delete current message
7
Turn on the answering
machine
8
Stop current message
playback
9
Turn off the answering
machine
# Enter the remote access
code if the answering
machine is on and
outgoing message is
playing
ID555_IFU_GB.book Page 46 Friday, July 18, 2008 2:06 PM