Phantom Tech Viewpoint VI0508 - Manual (Page 6)

Measuring the
Door Opening
H
W
The Viewpoint Screen requires a minimum
Mounting Surface of 1 3/4" (45 mm). This
mounting surface must be flat and flush, and at
a right angle (90º) to the door.
For the Width - Measure the width of the
opening between the right and left surfaces of
the door frame, record this dimension in the box
below labeled “W”.
For the Height – Measure the height of the
opening between the underside of the top of
the door frame (or filler strip), and the top of
the door sill at a point 1 3/4" (45 mm) from the
front surface of the frame. Record this
dimension in the box below labeled “H”.
NOTE: If the height of the door opening is
greater than the maximum height requirement,
it is still possible to install the Viewpoint
Screen. Simply attach a filler strip under the
top of door frame to reduce the height of the
opening to at least 80 9/16" (2,047 mm). Be
sure to attach the filler strip before taking the
height measurement.
=
=
6
W
H
A
1 3/4”
(45 mm)
mounting
surface
Door Sill