Plantronics CT10 - Manual (Page 16)

11
ENGLISH
FRANÇAIS ESP
AN
˜
OL POR
TUGUE
ˆS
KOREAN JAP
ANESE CHINESE
SPECIAL BUTTONS
MEM (MEMORY)
TO STORE NUMBERS
The In-Use Indicator Light should be off. If it is not off, press the
Talk/Hang Up Button once to shut it off.
Press the Mem Button followed by the numbers you want to store.
Press the Mem Button followed by the one digit number (0-9) on the
Telephone Keypad that you want to assign for that number.
You can repeat the process for storing numbers until the 10 single
numbers on the keypad are used up.
TO CHANGE STORED NUMBERS
To change a number stored in memory, simply store a new number in
that memory location.
TO DIAL STORED NUMBERS
Press the Talk/Hang Up Button . The In-Use Indicators and will
light up.
When the dial tone is heard, press the MEM Button , then press the
desired single digit (0-9) memory location button.
The stored number you have selected will be automatically dialed.
TO DIAL A STORED NUMBER DURING A CALL
The memory/recall function also works when additional numbers are
required during the call such as a numeric password. At the
appropriate time during the call press Mem
and the assigned key to
rapidly transmit the stored numbers.
G
G
G
G