Plantronics CT10 - Manual (Page 14)

9
ENGLISH
FRANÇAIS ESP
AN
˜
OL POR
TUGUE
ˆS
KOREAN JAP
ANESE CHINESE
STEP 3
STEP 2
MAKE A CALL
Before using your cordless telephone, put the headset on and adjust it
as needed.
To make a call, press the Talk/Hangup Button on the Remote .
The In-Use Indicator will light.
When you hear dial tone, enter the number you want to call.
To disconnect a call, press the Talk/Hangup Button .
RECEIVE A CALL
Set the Ringer Switch on the Remote to the ON position.
To answer a call press the Talk/Hangup Button . The In-Use
Indicator on the Remote and the In-Use Indicator (Talk) on the
Base will light.
When you press any button on the Remote, a short sound will be heard
indicating that the Base has accepted the command.
Three short warning beeps indicate that you are out of range, or there
is too much interference.
If there is interference, move closer to the base before you press any
key. If interference is severe, the Remote might lose communication with
the Base and the call might be disconnected.
This does not happen often, but if it does, return the Remote to the
Charging Well for a few seconds.
F
G
G