PVI Industries Platinum Gas-Fired Water Heater - Manual

See complete warranty and/or service policy for details
PLATINUM ® CONDENSING GAS-FIRED WATER HEATER
POLYSHIELD
®
POLYMER-LINED TANK
PVI reserves the right to change
the design and specification
without notice. PV6801 10/08
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
(800) 784-8326 ▪ (817) 335-9531 ▪ www.pvi.com
STANDARD FEATURES AND EQUIPMENT
• POLYSHIELD ® polymer-lined tank with 5-year warranty
• Five-year heat exchanger warranty
• One-year cost-free service policy
• Factory authorized startup
• Up to 94% thermal efficiency
• Electronic temperature control with LED readout; accurate to ± 1°F
• Removable heat exchanger with non-ferrous waterside construction and solid copper fire tubes
• 100% submerged combustion
• Heat exchanger ASME stamped for 160 psi operating pressure
• Storage tank ASME stamped for 160 psi operating pressure and National Board of Pressure Vessels Registered
• Nonferrous, removable fittings at all tank connections
• Fan assisted, pre-mix, stainless steel burner
• Two safety shut off valves (single body)
• NOx emission levels compliant with SCAQMD
• Air proving switch
• Electronic combustion sequencer and safeguard with pre-purge
• Operating thermostat
• Redundant high limits with automatic reset
• ASME-rated temperature and 150 psi pressure relief valve
• Drain valve
• Fiberglass insulated tank
• Durable, corrosion-resistant, polyethylene jacket
• Heavy-duty steel stand
• Support stand is designed to allow tank to be rotated to horizontal position for heat exchanger removal
• 23"-diameter tank access after heat exchanger removal
• ASHRAE 90.1 compliant for thermal efficiency and standby loss
• UL listed for PVC venting material
• UL listed for zero clearance from combustible walls (non-combustible floor only)
• UL listed for NSF-5 compliance
• FM compliant
OPTIONAL FEATURES AND EQUIPMENT
Electronic low water cutoff
Manual-reset, immersion temperature limiting device
Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others)
Water pressure gauge
L.P. gas operation
Condensate neutralization system
CSD-1 and IRI compliant components (includes manual reset electronic low water cut off and manual reset
temperature limiting device)
AGA-rated temperature and pressure relief valve
Tridicator (field installed)
Lifting attachments
Other agency compliance _______________________ (consult factory)