Pioneer DEH-P7900UB - Manual (Page 45)

45
EN
G
L
IS
H
Available accessories
Notes
• If you select other discs during repeat play, the repeat play range changes to Disc repeat.
• During video CD or CD playback, if you perform track search or fast forward/reverse during
Track repeat, the repeat play range changes to Disc repeat.
• During compressed audio playback, if you select another folder during repeat play, the
repeat play range changes to Disc repeat.
• During compressed audio playback, if you perform track search or fast forward/reverse
during Track repeat, the repeat play range changes to Folder repeat.
• When using this unit with multi-DVD player, you can switch to ITS play mode, ITS memo
and disc title input.
• The ITS function of a DVD player differs slightly from ITS playback with a multi-CD player.
With multi-DVD player, ITS playback applies only to the CD playing. For details, refer to
“Using ITS playlists” on page 42.
TV tuner
Basic Operations
You can use this unit to control a TV tuner, which is sold separately.
For details concerning operation, refer to the TV tuner’s operation manual. This
section provides information on TV operations with this unit which differs from that
described in the TV tuner’s operation manual.
Function name Operation
Play mode Refer to “Selecting a repeat play range” on page 17.
But the repeat play range that you can select is vary depending on the
type of disc or system. The repeat play ranges of the DVD player/multi-
DVD player are as below:
During PBC playback of Video CDs, this function cannot be operated.
• Disc repeat – Repeat the current disc
• Folder repeat – Repeat the current folder
• Title repeat – Repeat just the current title
• Chapter repeat – Repeat just the current chapter
• Track repeat – Repeat just the current track
Random mode Refer to “Playing tracks in random order” on page 17.
Scan mode Refer to “Scanning folders and tracks” on page 17.
Pause Refer to “Pausing disc playback” on page 17.
ITS play mode Refer to “Using ITS playlists” on page 42.
ITS memo Refer to “Using ITS playlists” on page 42.
TitleInput "A" Refer to “Entering disc titles” on page 18.
1. Press SOURCE to select the TV.
2. Press BAND to select a band.
Press BAND until the desired band is
displayed, TV-1 or TV-2.
3. To perform manual tuning, push MULTI-CONTROL left or right.
4. To perform seek tuning, push and hold MULTI-CONTROL left or right for about
one second and release.
The tuner will scan the channels until a broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pushing MULTI-CONTROL left or right.
• If you push and hold MULTI-CONTROL left or right, you can skip broadcasting
channels. Seek tuning starts as soon as you release MULTI-CONTROL.
Storing and recalling broadcast stations
You can easily store up to 12 broadcast stations for later recall.
• Up to 24 stations, 12 for each of two TV bands, can be stored in memory.
1. When you find a station that you want to store in memory press LIST.
2. Use MULTI-CONTROL to store the selected station in memory.
Turn to change the preset number; press and hold to store.
The preset number you have selected will flash and then remain lit. The selected
station has been stored in memory.
3. Use MULTI-CONTROL to select the desired station.
Turn to change the station; press to select.
• You can also change the station by pushing MULTI-CONTROL up or down.
• If you do not operate the list within about 30 seconds, the display is automatically
returned to the ordinary display.
ቢ Band indicator
ባ Preset number indicator
ቤ Channel indicator
MAN-DEH-P7900UB-GB.fm Page 45 Wednesday, February 21, 2007 11:20 AM