Philips VR670B/58 - Manual (Page 25)

21
aThe counter does not move
b This occurs when there are no recordings on a portion of a tape.
Therefore, the video recorder cannot receive any information from the
tape. This is not a fault in your machine.
aThe display/the screen shows '-0:01:20'
b If you rewind a cassette from the tape position '0:00:00', the counter will
show for instance, ' -0:01:20' (the cassette will be rewound to 1 minute
and 20 seconds before ' 0:00:00').
a' : ' is displayed in the 'REMAIN' counter
b This counter will automatically recognise the length of the tape. In addition,
when you put in a cassette the video recorder must first calculate the time
played. Therefore, '-:--' appears first and only after the tape has been
running for a few seconds will the correct playing time be shown.
Searching for a tape position with picture
(scanning)
0:30:
21
1
While a cassette is playing, press H (reverse) or I (forward) one
or more times. This will, for example, appear in the display:
2
To stop at a certain place on the tape, press PLAY G .
Decreased picture quality
Scanning interferes with the picture quality. The sound is switched off. This is
not a fault in your machine.
Still picture / slow motion
0:00:
02
1
During playback, press STILL R to stop the tape and display a still
picture. This will, for example, appear in the display:
2
Each time you press STILL R , the picture will advance one frame.
3
When you hold down the STILL R button, the tape will be played
in slow motion.
4
When you press I several times, you have a choice of several
playback speeds for slow motion.
5
To continue playback, press PLAY G .
ENGLISH
Playback