Philips MC-110 - Manual (Page 22)

22
English
3140 115 28731
The remote control does not function – Select the source (CD or TUNER, for example)
properly. before pressing the function button (Й,н,л).
– Reduce the distance between the remote control
and the system.
– Insert the batteries with their polarities
(+/– signs) aligned as indicated.
– Replace the batteries.
– Point the remote control directly toward
IR sensor on the front of the system.
The timer is not working. – Set the clock correctly.
– Press TIMER ON•OFF to switch on the timer.
– If a recording is in progress, stop the recording.
The Clock/Timer setting is erased. – Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
Troubleshooting
pg 001-022/MC1xx/22-Eng 10/5/01, 2:46 PM 22