Philips MC-110 - Manual (Page 12)

12
English
3140 115 28731
CD Operation
SELECT
SOURCE
TIMER
ON • OFF
INTERACTIVE SOUND
STANDBY
ON
SHUFFLE REPEAT
RDS
BAND
PREV NEXT TUNING
DBB DSC
PRESET STOP PLAY•PAUSE iR SENSOR
VOLUME
INCREDIBLE SURR.
CLOCK
PROGRAM
CD PROGRAM
IMPORTANT:
The lens of the CD player should never be
touched.
X
Playing a disc
This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
● CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1 Select CD source.
2 Press OPEN•CLOSE on the top
of the system to open the CD
compartment.
➜
OPEN is displayed when you
open the CD compartment.
3 Insert a disc with the printed side facing up and
press down on
OPEN•CLOSE to close the
CD door.
➜
READ is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks and playing time are shown.
4 Press PLAY•PAUSE 2; (on the remote
control 2;) to start playback.
➜ Current track number and elapsed playing
time of the track are displayed during disc
playback.
5 To interrupt playback press PLAY•PAUSE 2;
(on the remote control
2;). Press
PLAY•PAUSE 2; (on the remote control 2;)
again to resume play.
➜ The display freezes and the elapsed playing
time flashes when playback is interrupted.
6 To stop disc playback, press STOP 9.
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER or AUX.
– you select to standby.
– you press the tape deck PLAY
2 key.
Selecting a different track
● Press PREV ¡1 or NEXT 2™ (on the remote
control
¡ or ™) once or repeatedly until the
desired track number appears in the display.
● If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press
PLAY•PAUSE 2; (on the
remote control
2;) to start playback.
Finding a passage within a track
1 Press and hold down on PREV ¡1 or
NEXT 2™ (on the remote control à or á ).
➜ The disc is played at high speed and low
volume.
2 When you recognise the passage you want,
release
PREV ¡1 or NEXT 2™ (on the
remote control à or á ).
➜ Normal playback continues.
Note:
– During a disc programme or if SHUFFLE/
REPEAT active, searching is only possible within the
same track.
OPEN • CLOSE
pg 001-022/MC1xx/22-Eng 10/5/01, 2:46 PM 12