Philips MC-110 - Manual (Page 20)

20
English
3140 115 28731
UFFLE SLEEP
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
● Press SLEEP on the remote
control once or more.
➜ Display shows
SLEEP and
one of the sleep time options
in sequence:
60, 45, 30,15,
SLEEP OFF, 60... if you have
selected a time. Once SLEEP is activated,
SLEEP
ON scrolls across the display at repeated
intervals.
Clock/Timer
Specifications
AMPLIFIER
Output power .......................................... 2 x 5 W RMS
............................................................. 10 W + 10W MPO
Signal-to-noise ratio ..........................
≥
65 dBA (IEC)
Frequency response ......... 40 – 20000 Hz, ± 3 dB
Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers ......................................... 8
Ω
Impedance headphones ................. 32
Ω
– 1000
Ω
CD PLAYER
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio ............................................ 75 dBA
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range ................................ 531 – 1602 kHz
LW wave range ..................................... 153 – 279 kHz
Sensitivity at 75
Ω
– mono, 26 dB signal-to-noise ratio ............ 2.8 µV
– stereo, 46 dB signal-to-noise ratio ........ 61.4 µV
Selectivity .................................................................
≥
28 dB
Total harmonic distortion .....................................
≤
5%
Frequency response ..... 63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio ......................................
≥
50 dBA
● To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY ON on the system
or remote control.
➜
SLEEP OFF scrolls across the display.
TAPE DECK
Frequency response
Normal tape (type I) ... 120 – 10000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) .................................... 48 dBA
Wow and flutter .........................................
≤
0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (w x h x d) . 155 x 220 x 210 (mm)
GENERAL INFORMATION
AC Power ..................................... 220 – 230 V / 50 Hz
Dimensions (w x h x d) ... 140 x 223 x 253(mm)
Weight (with/without speakers) ..................................
............................................................... approx. 6.0 / 2.8 kg
Standby power consumption .......................... < 3 W
Subject to modification
pg 001-022/MC1xx/22-Eng 10/5/01, 2:46 PM 20