beautypg.com

Tape operation / recording, Maintenance – Philips MC-110 User Manual

Page 18

background image

18

English

3140 115 28731

6

For brief interruptions during recording, press
PAUSE. To resume recording, press PAUSE
again.

7

To stop recording, press

STOP•OPEN.

Recording from the radio

1

Tune to the desired radio station (see Tuning to
radio stations).

2

Press

STOP•OPEN to open the tape door.

3

Insert a suitable tape into the deck and close the
tape door.

4

Press

RECORD to start recording.

5

For brief interruptions, press

PAUSE. To

resume recording, press

PAUSE again.

6

To stop recording, press

STOP•OPEN.

Tape Operation / Recording

Cleaning the Cabinet

● Use a soft cloth slightly moistened with a mild

detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.

Cleaning Discs

● When a disc becomes dirty,

clean it with a cleaning cloth.
Wipe the disc from the centre
out.

● Do not use solvents such as

benzene, thinner, commercially
available cleaners, or antistatic spray intended
for analogue records.

Cleaning the disc lens

● After prolonged use, dirt or dust may

accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.

Maintenance

Recording from Aux

1

Select

AUX source.

2

If necessary, prepare the additional appliance for
recording.

3

Press

RECORD to start recording.

Cleaning the Heads and the Tape Paths

● To ensure good recording and playback quality,

clean the heads

A

, the capstan(s)

B

, and

pressure roller(s)

C

after every 50 hours of

tape operation.

● Use a cotton swab slightly moistened with

cleaning fluid or alcohol.

● You can also clean the heads by playing a

cleaning tape once.

A

A B C

Demagnetising the heads

● Use a demagnetising tape available at your

dealer.

pg 001-022/MC1xx/22-Eng

10/5/01, 2:46 PM

18