Philips MC-110 - Manual (Page 11)

11
English
3140 115 28731
Basic Functions
INTERACTIVE SOUND
SHUFFLE
RDS
PREV NEXT TUNING
DBB DSC
PRESET STOP PLAY•PAUSE iR SENSOR
VOLUME
INCREDIBLE SURR.
CD
CLOCK
STANDBY
ON
PROGRAM
TIMER
ON•OFF
REPEAT
BAND
SELECT
SOURCE
PROGRAM
TIMER
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press 2 STANDBY ON or SELECT
SOURCE.
➜ The system will switch to the last selected
source.
● Press CD, TUNER, TAPE or AUX on the
remote control.
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press 2 STANDBY ON on the system or
remote control.
● If in tape mode or recording mode, press
STOP•OPEN first.
➜ The volume level, interactive sound settings,
last selected source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system
automatically switches to standby 15 minutes
after a tape or CD has reached the end and no
control is operated.
Adjusting volume and sound
1 Turn the VOLUME control anti-clockwise to
decrease or clockwise to increase volume on the
system (or press
VOL -/+ on the remote
control).
➜ Display shows the volume level
VOL and a
number from 0-32.
2 Press DSC repeatedly to select the desired
sound effect: OPTIMAL (no indication)/
ROCK ( ) / JAZZ ( ) / POP ( ).
3 Press DBB to switch bass enhancement on or
off.
➜ Display shows:
DBB if the DBB is activated.
4 Press INCREDIBLE SURR. (IS on the
remote control) to switch the surround sound
effect on or off.
➜ Display shows:
if activated.
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.
5 Press MUTE on the remote
control to interrupt sound
reproduction instantly.
➜ Playback will continue
without sound and the display
shows
MUTE.
● To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
DSC DBB
MUTE
pg 001-022/MC1xx/22-Eng 10/5/01, 2:46 PM 11