Philips MAGIC 5 ECO PPF 631 - Manual (Page 9)

Initial Operation · Connecting the Handset 9
EN
Connecting the Handset
Connecting the Handset Plug one end of the spiral cable into the socket on the tel-
ephone handset. Insert the other end into the socket desig-
nated with the ) symbol.
Connecting the Handset
Connecting the Telephone
Cable
Connecting the Telephone Cable
Connecting the Telephone Cable Connect the telephone cable to the device by inserting it in
the socket designated with LINE (RJ-11-Connector).
Insert the telephone plug into your PTT line socket.
Connecting the Telephone Cable
PABX Systems 1
Ireland
Two-pin When connecting to the telephone line socket, use only a
two-pin
RJ-11-telephone cable (modular plug). The use
of a four-pin telephone cable may lead to the device not
functioning correctly.
Connecting the Power Cable
Mains Voltage at the Site of Installation
Connecting the Mains Cable Insert the mains cable into the connection located on the
rear side of the device. Plug the power cable into the elec-
trical outlet.
Connecting the Power Cable
Initial Installation
Starting Initial Installation After you connect your device to the mains voltage, the ini-
tial installation commences. Press i. Your device prints a
help page.
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with OK.
Selecting the Country
Setting the Country Correctly
Setting the Country
1 Use [ to select the country in which you are operat-
ing the device.
2 Confirm with OK.
After this input, t he device prints another help page and
checks the telephone line.
Notice
Analogue Fax Machine
Your device is an analogue fax device (Group 3).
It is not an ISDN device (Group 4), and there-
fore it cannot be operated directly on an ISDN
connection. In order to do this, you need either
an analogue adapter or a connection for ana-
logue terminals.
Notice
Connection to Private Automatic
Branch Exchange
If you connect your device as extension to a tel-
ephone system, you must set it for working as an
extension (also see Chapter Telephone connec-
tions and additional devices , page 22).
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device
(indicated on the type label) matches the mains
voltage available at the setup location.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper-
ating the device. Otherwise your device is not
adapted to the telephone network. If your coun-
try is not included in the list, you must select a
different setting and use the correct t elephone
cable for the country. Consult your retailer.
ppf-631-631-eco-manual-uk-253120765-b.book Seite 9 Mittwoch, 30. September 2009 12:26 12