Panasonic CF-S9 - Manual (Page 18)

18
Handling and Maintenance
G
ett
in
g S
ta
rte
d
U
se
ful
In
formati
on
Trouble
s
hooting
Appendi
x
z Click on the notification area and click . Then select [Panasonic Power management (Better Heat Dispersion)]
• When changing to [Panasonic Power management (Better Heat Dispersion)], the following settings will change.
- Change to [High Speed] from [Standard] in [Fan control mode].
Rotation of the cooling fan will become faster and the computer can be cooled down. Note that the battery oper-
ating time will be shorter.
- Switch the screen saver to [Prohibited].
- Other setting changes such as the lowering of the internal LCD brightness and disabling of Windows Aero will
take place.
• When you do not frequently use CPU or the rotation noise of the fan bothers you, set [Standard] or [Low Speed] in
[Fan control mode].
A Click on the notification area and click .
B Select [Standard] or [Low Speed] in [Fan control mode].
Î Reference Manual “Customizing the Power Setting”
„ When using peripheral devices
Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction
manuals of the peripheral devices.
z
Use the peripheral devices conforming to the computer’s specifications.
z Connect to the connectors in the correct direction.
z If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of pins, etc.
z If screws are included, fasten them securely.
z Remove the cables when you carry the computer. Do not pull the cables forcibly.
„ Preventing your computer from unauthorized use via wireless LAN/wireless WAN/Bluetooth
z
Before using wireless LAN/wireless WAN/Bluetooth, make the appropriate security settings such as data encryption.
To clean the LCD panel and touch pad
Wipe lightly with a gauze or other dry, soft cloth.
To clean areas other than the LCD panel and touch pad
Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area
gently. Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect
painted surfaces.
CAUTION
z Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.
Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to
the surface.
z Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause
malfunction or damage.
When setting the screen resolution to a resolution below the LCD’s resolution, the images appearing on the screen will
be stretched. As a result, the characters displayed may appear blurred. This is normal, and not indicative of a malfunc-
tion.
To display large characters with no blurring
Try the following steps while keeping the LCD in its resolution.
z
Click (Start) - [Control Panel] - [Appearance and Personalization] - [Display], select except for [Smaller - 100%]
and then click [Apply].
(This function will be enabled after log off the computer.)
z To display enlarged font sizes in applications such as Internet Explorer:
Use the display enlargement function provided by the specific software application.
z To display enlarged desktop icons, title bar and cursor or magnify the specific part of the screen:
Use “Icon Enlarger” or “Loupe Utility”.
Maintenance
When Using the Computer with a Reduced Screen Resolution
CF-S9mk2(DFQW5426ZA)_OI_EN.book Page 18 Tuesday, July 20, 2010 3:30 PM